Hdd Settings] - Oce VarioLink 2222c User Manual

7
Administrator Settings
[Network Settings] / [WebDAV Settings] / [WebDAV
Server Settings] / [SSL Setting]
[Network Settings] / [TCP Socket Settings]
[System Connection] / [OpenAPI Settings]
[Network] in Web Connection / [E-mail Setting] /
[S/MIME]
[Network Settings] / [FTP Settings] /[FTP Server
Settings]
[Network Settings] / [SNMP Settings] / [SNMP
v1/v2c Settings]
[Network Settings] / [SNMP Settings] / [SNMP v3
Settings]
[Security Settings] / [Security Details] / [Print Data
Capture]
[Maintenance] in Web Connection / [Reset] / [Net-
work Setting Clear]
[Security]/[Administrator Password Setting] in Web
Connection
[Security Settings] / [Security Details] / [Prohibited
Functions When Authentication Error] / [Release
Time Settings]
Review [Secure Document User Box]
[Security Settings] / [Security Details] / [Initialize] /
[Network Settings]
[Security Settings] / [Image Log Transfer Settings]
CS Remote Care
If Enhanced Security settings is enabled, various security functions are configured to allow you to ensure
higher-level security of data management. For details, contact your service representative. To enable the en-
hanced security mode, the following settings must first be configured. Different screens appear depending
on the current settings.
7.10.6

[HDD Settings]

This setting is for the hard disk operations. For details, refer to the [User's Guide Box Operations].
7-50
[Security Settings]
Settings to forcibly changed
Set to [SSL Only].
[Use SSL/TLS] is set to [ON].
Set to [SSL Only].
[Automatically Obtain Certificates] is set to [OFF].
[E-Mail Text Encrypt. Method] is set to [3DES].
[FTP Server Settings] is not displayed.
[Write Setting] is set to [Invalid].
In [Write User], [Security Level] cannot be set to
[OFF].
Set to [Restrict].
[Network Setting Clear] is not displayed.
[Administrator Password Setting] is not displayed.
The allowable setting range is limited to 5 or more
minutes. This value cannot be less than 5 minutes.
Only the list is displayed before the password au-
thentication is performed.
[Network Settings] is not displayed.
Set to [OFF].
Restricts the device setting in the remote mode
based on CS Remote Care.
VL3622c/VL2822c/VL2222c
7.10