Oce VarioLink 2222c User Manual page 140

6
Settings
[Auto Zoom (Platen)]
[Auto Zoom (ADF)]
[Specify Default Tray when
APS Off]
[Select Tray for Insert
Sheet]
[Print Jobs During Copy
Operation]
[Automatic Image Rotation]
[Finishing Program]
[Card Shot Settings]
Factory default
[Auto Booklet ON when
Fold & Staple]
[Auto Zoom for Com-
bine/Booklet]
[Auto Sort/Group Selec-
tion]
[Default Copy Settings]
[When AMS Direction is In-
correct]
[Separate Scan Output
Method]
[Enlargement Rotation]
[Auto Zoom (Platen)]
[Auto Zoom (ADF)]
[Specify Default Tray when
APS Off]
[Select Tray for Insert
Sheet]
[Print Jobs During Copy
Operation]
[Automatic Image Rotation]
[Finishing Program]
[Card Shot Settings]
6-10
Appears when user access is permitted under [Administrator Settings]. For
details, refer to page 7-39.
Configure whether to display the Finishing Program button in the basic set-
tings screen. To display the button, register the contents of the finishing
program.
Register frequently used finishing functions so that you can set them at
once by using the button that appears in the basic settings screen.
This item is available if the Finisher FS-527 or Finisher FS-529 is installed.
Appears when user access is permitted under [Administrator Settings]. For
details, refer to page 7-39.
[Auto Select Booklet]
[Auto Display Zoom Ratio]
[Yes]
[Factory Default]
[Print]
[Page Print]
[Allow]
[OFF]
[ON]
[Tray Before APS ON]
[Tray 2]
[Accept]
[When Auto Paper/Auto Zoom is set]
[ON]
- [Layout]: [Top/Bottom]
- [Zoom]: [Full Size]
[Copier Settings] 6.3
VL3622c/VL2822c/VL2222c