Copier Settings] - Oce VarioLink 2222c User Manual

6.3

[Copier Settings]

6.3 [Copier Settings]
Configure the settings used by the copy functions.
%
Press the Utility/Counter key ö[User Settings] ö [Copier Settings].
Settings
[Auto Booklet ON when
Fold & Staple]
[Auto Zoom for Com-
bine/Booklet]
[Auto Sort/Group Selec-
tion]
[Default Copy Settings]
[Default Enlarge Display
Settings]
[When AMS Direction is In-
correct]
[Separate Scan Output
Method]
[Enlargement Rotation]
VL3622c/VL2822c/VL2222c
Configure whether to automatically specify Booklet when Center Staple
and Fold is selected.
This item is displayed if the Saddle Stitcher SD-509 is installed in the Fin-
isher FS-527.
Configure whether the preset zoom ratios are automatically selected when
Combine or Booklet is selected in Auto Paper mode.
• Select the recommended zoom ratios for the following zoom settings:
2 in 1, Booklet: 70.7%
4 in 1: 50.0%
8 in 1: 35.3%
Configure whether to output the copied pages automatically in Sort mode
when copying multiple-page original using the ADF.
Configure the initial values for the Copy function to be displayed when the
power in turned on or the Reset key is pressed.
[Current Setting] The current settings are used as the default set-
tings.
[Factory Default] The factory settings are used as the default set-
tings.
This setting is for the enlarged display screen operations. For details, refer
to the [User's Guide Enlarge Display Operations].
Configure whether to print or discard the job when the original orientation
does not match that of paper in Auto Zoom mode.
Configure the output for divided original loaded in the ADF or for multiple
pages of the original scanned on the Original Glass.
[Page Print] Printing of copies that can be printed begins while
the original is being scanned.
[Batch Print] Printing begins after all pages of the original have
been scanned.
Configure whether to rotate and print a large-size original image when the
original orientation does not match that of paper.
6
6-9