Original Setting] - Oce VarioLink 2222c User Manual

5
5.2

[Original Setting]

Configure the original status or original direction for outputting desired copies.
%
Press [Original Setting].
Settings
[Mixed Original]
[Z-Folded Original]
[Original Size]
[Binding Position]
[Original Direction]
[Despeckle]
5-16
Loads originals of different sizes into the ADF and scan them at a time.
Correctly detects the original size when folded originals are loaded into the
ADF and copied.
Select [Auto] to detect the size of the original automatically.
If the size of the original is not automatically detected, select the original
size.
[Custom Size] Enter the original size.
[Photo Size] Select the photo size.
Specify the original binding position (page margin) to prevent the copy
from being printed upside-down when scanning a 2-sided original.
[Auto] Automatically configures the binding position of
the original.
•
•
When copying double-sided originals or making double-sided or com-
bined copies, press this button to specify the direction in which the original
is loaded into the ADF or placed on the Original Glass.
Reduces the influence of a dirt of the Slit Scan Glass upon a copy output
when loading an original in the ADF.
[Original Setting]
A page margin position along the long side of
the paper is selected if the original length is
11-11/16 inches (297 mm) or less.
A page margin along the short side of the pa-
per is selected if the original length exceeds
11-11/16 inches (297 mm).
VL3622c/VL2822c/VL2222c
5.2