Selecting The Paper Source; Setting The Paper Source Of The Paper Type - Oce cm3521 User Manual

Setting up the PCL driver

Selecting the paper source

When changing the paper type, you can register it to an input tray and you
will be able to select the input tray according to the desired paper type.
1
Click the Setup tab.
2
From the "Paper Source" drop-down list, select the paper tray that
contains the paper to be used.

Setting the paper source of the paper type

Follow the procedure described below to assign a paper type to a paper tray.
1
Click the [Paper Type Settings] button.
2
Select the "Paper Source" being changed, and then click the [Edit Pa-
per Type] button.
3
Select the desired setting from the "Paper Type" drop-down list, and
then click the [OK] button.
Only the paper types that can be selected in each input tray are dis-
played.
cm3521
5
5-7