User Max-Number; User Idle-Timeout - TP-Link JetStream TL-SL3452 Reference Manual

user max-number

Description
The user max-number command is used to configure the maximum login user
number at the same time. To cancel the limit on login number, please use no
user max-number command.
Syntax
user max-number admin-num guest-num
no user max-number
Parameter
admin-num —— The maximum number of the users allowed to log on as Admin,
ranging from 1 to 16. The total number of Admin and Guest should be less than 16.
guest-num —— The maximum number of the users allowed to log on as Guest,
ranging from 0 to 15. The total number of Admin and Guest should be less than 16.
Command Mode
Global Configuration Mode
Example
Configure the maximum number of users' login as Admin and Guest as 5 and 3:
TL-SL3428(config)#user max-num 5 3

user idle-timeout

Description
The user idle-timeout command is used to configure the timeout time of the
switch. To restore to the default timeout time, please use no user idle-timeout
command.
Syntax
user idle-timeout minutes
no user idle-timeout
Parameter
minutes ——The timeout time, ranging from 5 to 30 in minutes. The value is 10
by default.
TL-SL3428/TL-SL3452
45
JetStream L2 Managed Switch CLI Guide