Table of Contents
Advertisement
Energy Save Mode
In order to conserve energy, the machine will automatically enter a stand-
by mode (Energy Save mode) if no operation is performed for a specified
length of time. When the machine enters Energy Save mode, the indicator
on the [START] key remains lit in green, but the touch panel goes off.
At this time, the machine reduces the heat of the fusing section, and goes
into Energy Save Mode.
Conditions for entering Energy Save mode
G
15 minutes, or a specified period after the machine is last used
(factory default settings are 15 minutes).
Note
To recover from Energy Save mode, press any key in the control panel
or touch the touch panel.
The machine will not enter Energy Save Mode while printing is
paused.
The settings specifying whether or not and the time until the machine
enters Energy Save mode can be changed. For details, refer to
"Changing Default Settings" on page 7-6.
Sleep Mode
In order to conserve energy, the machine's heater goes off and the
machine automatically enters Sleep mode if no operation is performed for
a specified length of time.
Conditions for entering Sleep mode
G
No machine operation is performed for 1 minute.
Note
To recover from Sleep mode, press any key in the control panel or
touch the touch panel.
The machine will not enter Sleep Mode while printing is paused.
The settings specifying whether or not and the time until the machine
enters Sleep mode can be changed. For details, refer to "Changing
Default Settings" on page 7-6.
4-12
Before Making Copies
Di2510f/Di3510f
Advertisement
Table of Contents
