Table of Contents
Advertisement
Fax Operations
6.6
Automatic Fax Reception
Auto reception is the default setting for the reception method.
Documents received will be printed automatically without any special
action.
Here we will describe the paper sizes that can be received automatically
and what to do when the paper runs out.
Item
During Fax Reception:
Receiving A3
Documents
When the Paper Runs
Out
Receivable Paper
Sizes
About the Received
Documents
Di2510f/Di3510f
Explanation
The
mark is displayed in the touch panel.
A beep sounds when reception is complete.
See page 6-24 for the procedures for verifying
transmission results and stored documents.
These can be received only when based on ITU-T
(formerly CCITT) recommendations capable of
transmitting an A3 size fax on the transmitting end in
the original dimensions.
The [
] mark will be displayed on the touch panel.
The feed tray injector will be shown in red, and printing
will be stopped. (The
touch panel for 2500-page paper feed cabinets.)
Because the received document is stored in memory,
the printing is automatically restarted after resetting
the paper.
The rest of the document cannot be received when the
memory remaining is 0% or when little memory
remains.
Paper sizes A5 L, B5 L/C, A4 L/C, B4 L, and A3 L can
be received.
When there is no paper the same size as the received
document, it will be printed on different size paper.
When you have received documents on A4, B5 L, or
A5 L, even if the paper orientation is different, they will
be rotated 90° before printing (rotated recording).
The receipt method can be changed by the Utility
settings.
mark will be displayed in the
6-19
Advertisement
Table of Contents
