Table of Contents
Advertisement
Message
Re-insert the following
number of document
pages: OO
Cannot XXXXXXXX (not
enough
free memory). Press Start
to resume.
This mode cannot be
selected with XXXXXXXX.
Pause.
Properly close the
section(s)
indicated by the arrow(s).
The maximum number of
copies allowed for this
registered account has
been reached. Please
contact the administrator.
The maximum number of
jobs to be printed has been
reached. Please contact
the administrator.
14-2
Cause
After clearing a paper
misfeed, it is necessary
to reload certain pages
of the document that
have already been fed
through the duplexing
document feeder.
Since the memory is
full, no more pages can
be scanned.
The memory is full.
The memory is full, so
jobs can not be queued.
Functions that cannot
be used together are
selected.
When making 2in1
copies, the second
document page could
not be scanned while
scanning manually.
The door or cover
indicated by the arrow
is open.
The total amount of
copies as set by the
administrator has been
reached.
The total amount of jobs
to be printed as set by
the administrator has
been reached.
Troubleshooting
Remedy
Load the indicated
document pages into
the duplexing
document feeder.
Print pages or delete
queued jobs to clear
some of the memory.
The memory is full.
There are 200 queued
documents.
Make copies using only
one of the functions.
Position the second
document page or
press [FINISH].
Make sure that all doors
and covers are properly
closed.
Ask the administrator to
clear the number of
copies.
Ask the administrator to
clear the number of jobs
to be printed.
Di2510f/Di3510f
Advertisement
Table of Contents
