Table of Contents
Advertisement
How to Set Soft Switches
Follow the procedure described in "To display the Administrator
Management screens" on page 12-1.
Touch [ADMIN. 2], and then touch
[SOFT SW SET].
Touch [MODE SELECTION], and
enter the mode using the keypad.
Specify the mode using the [BIT
SELECTION] or [HEX SELECTION]
key.
H
For bit selection:
Touch [BIT SELECTION], and
use the arrow keys to place the
cursor on the bit you want to
change.
Use the keypad to enter a [0] or
[1], and touch [ENTER].
H
For HEX specification:
Touch [HEX SELECTION], use
the keypad and the letters [A]
to[F] to specify the bits, and
touch [ENTER].
12-58
Administrator Management Operations
Di2510f/Di3510f
Advertisement
Table of Contents
