Table of Contents
Advertisement
Introduction
1.3
Explanation of Basic Concepts and Symbols
The use of words and symbols in this manual are explained below.
Paper Feeding
During printing, paper is supplied from the right side of the machine and
fed into the output tray on top or the output option at the left with the
printed surface of the page facing down. The paper feed direction is
shown by the arrows in the diagram below.
"Width" and "Length"
Whenever paper dimensions are
mentioned in this manual, the first
value always refers to the width of the
paper (shown as "Y" in the illustration)
and the second to the length (shown as
"X").
Di2510f/Di3510f
1-3
Advertisement
Table of Contents
