Table of Contents
Advertisement
H
To register an F-code:
Enter with the keypad, and
touch [ENTER].
H
To set the remote input
check:
Select the desired setting, and
touch [ENTER].
After verifying the entered
information, touch [ENTER].
Tip
The [F-CODE PASSWORD] is set
the same way.
To correct an entry, either use the
arrow keys to move the cursor and input, or press the [C] key and re-
input.
When [DELETE] is touched, the character on the cursor is deleted.
When [CANCEL] is touched, the screen returns to the state before
registration began.
Tip
To continue registering confidential boxes, repeat steps 4 to 7.
11-26
Configuring the Utilities and Fax
Di2510f/Di3510f
Advertisement
Table of Contents
