Minolta Di620PE Operato's Manual
  1. Manuals
  2. Brands
  3. Minolta Manuals
  4. All in One Printer
  5. Di620PE
  6. Operato's manual
Minolta Di620PE Operato's Manual

Minolta Di620PE Operato's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Di620PE
CF911PE
Operator's Manual

Advertisement

Table of Contents
loading

Related Manuals for Minolta Di620PE

Summary of Contents for Minolta Di620PE

  • Page 1 Di620PE CF911PE Operator’s Manual...

  • Page 2: Using The Printer Properly

    • Always ensure that the power cord or communications cable of other electrical equipment does not become wedged into the printer mechanism, as malfunctioning equipment or a fire could result. Di620PE Operator’s Manual...
  • Page 3 Pour avoir la certitude de travailler dans un environnement réunissant des conditions de confort, santé et de sécurité, il est préférable de bien aérer la pièce ou se trouve le l’appareil. Di620PE Operator’s Manual...

  • Page 4: Safety Precautions

    CDRH regulations and must be attached to laser products marketed in the United States. WARNING: Use of controls, adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure. Internal Laser Radiation Maximum Radiation Power: 15mW × 2 diodes Wave Length: 780nm Di620PE Operator’s Manual...

  • Page 5: For Denmark Users

    Dersom apparatet brukes på annen måte enn spesifisert i denne bruksanvisning, kan brukeren utsettes for unsynlig laserstråling som overskrider grensen for laser klasse 1. Dette en halvleder laser. Maksimal effeckt till laserdiode er 15mW og bølgelengde er 780nm. Di620PE Operator’s Manual...

  • Page 6: Laser Safety Label

    A laser safety label is attached to the outside of the printer as shown below. For Europe For United States 1155O698CB 4115O003AA 1155O699EB The Manufacturer’s Name Plate is affixed at the position illustrated above. Please write down the Model Name and Serial No. of your printer here. Model: Serial No. Di620PE Operator’s Manual...

  • Page 7: Regulatory Information

    FCC regulations. FCC-F01 For Canada Users: This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. IC-F03 Di620PE Operator’s Manual...
  • Page 8 3) This product was designed for operation in a typical office environment. EC Directives Safety : 73 / 23 / EEC and 93 / 68 / EEC : 89 / 336 / EEC and 93 / 68 / EEC Di620PE Operator’s Manual...

  • Page 9: Technical Support

    After you have read through the manual, keep it ready for reference. Please use this manual as a quick and handy reference tool for immediately clarifying any questions which may arise. MC-F01 Di620PE Operator’s Manual...
  • Page 10 “width,” we call it “lengthwise” and use symbol “L” or “ .” 1139O1610A <Crosswise > When the document or paper has a “length” shorter than its “width,” we call it “crosswise” and use symbol “C” or “ .” 1139O1620A Di620PE Operator’s Manual...

  • Page 11: Table Of Contents

    2. When the Message “Replenish Toner.” Appears Replacing the Toner Bottle ................4-6 3. When the Message “The Staple Cartridge is empty.” Appears Replacing the Staple Cartridge ...............4-8 4. When the Message “A paper misfeed has been detected.” Appears Misfeed Location Displays ................4-12 Di620PE Operator’s Manual...
  • Page 12 2. Care of the Printer Cleaning ......................6-7 3. Function Combination Matrix Function combination matrix ................. 6-8 Conditions for Combined Functions .............. 6-8 4. Description of Paper Size Table Description of paper size table ............... 6-9 Index About this Manual Di620PE Operator’s Manual...

  • Page 13: Chapter 1 Safety Notes

    Chapter 1 Safety Notes Di620PE Operator’s Manual...

  • Page 14: Installing The Printer

    Allow a clearance of 150mm (6″) or more at the back of the printer as there is a ventilation duct. 1323 (52) (19-3/4) 823 (32-1/2) 2831 (111-1/2) 230 (9) 2071 (81-1/2) 931 (36-3/4) 735 (29) (16-3/4) (11-1/2) 4115O004AA <With FN-3 and C-304L mounted> Unit: Metric (Inch) Di620PE Operator’s Manual...

  • Page 15: Precautions For Use Operating Environment

    Store paper, which has been removed from its wrapper but not loaded into the drawer, in a sealed plastic bag in a cool, dark place. Keep supplies out of the reach of children. If your hands become soiled with toner, wash them with soap and water immediately. Di620PE Operator’s Manual...

  • Page 16: Note On Making Multiple Prints

    In addition, it is prohibited under any circumstances to print domestic or foreign currencies or Works of Art without permission of the copyright owner. When in doubt about the nature of a document, consult with legal counsel. Di620PE Operator’s Manual...

  • Page 17: Chapter 2 Getting To Know Your Printer

    Chapter 2 Getting to Know Your Printer Di620PE Operator’s Manual...

  • Page 18: System Overview

    Large Capacity Cassette C-304 <Option> Large Capacity Cassette C-304L <Option> Holds up to 3,400 sheets of A4C, LetterC Holds up to 3,400 sheets of A4L or A4C, paper (80g/m , 20 lbs.). LegalL, LetterL or LetterC, paper (80g/m 20 lbs.). Di620PE Operator’s Manual...

  • Page 19: Printer Parts And Accessories

    : Use for manual feeding of paper into the printer. p. 3-3 Manual Feed Tray Extender : Slide this extender out to make prints on large-size paper. Total Counter : Shows the total number of prints made so far. Di620PE Operator’s Manual...
  • Page 20 : Holds up to 550 sheets of paper. p. 4-3 Tray 2 It can accommodate paper of different sizes. : Holds up to 2,700 sheets of paper. p. 4-4 Tray 3 Paper Descent Key : Press before sliding the drawer out of the printer. Di620PE Operator’s Manual...

  • Page 21: Printer Accessories

    2. Printer Parts and Accessories Printer Accessories 4115O008AB FN-3 LCC C-304 1155O734AB 1155O732AB FN-102 LCC C-304L Di620PE Operator’s Manual...

  • Page 22: Precautions When Using A Finisher

    : Use to unlock the Cassette from the printer for clearing a misfed sheet of paper or other service job. Paper Plate Descent Key : Press to lower the paper plate. Cassette Door : Open to add paper or clear a misfed sheet of paper. Di620PE Operator’s Manual...

  • Page 23: Inside The Printer

    : Slide out to clear a sheet of paper misfed in the Duplex Unit. p. 4-16 Duplex Unit : Use to clear a misfed sheet of paper. p. 4-14 Misfeed Removal Knob : Turn to clear a misfed sheet of paper. p. 4-14 Misfeed Removal Knob Di620PE Operator’s Manual...

  • Page 24: Turning On And Off

    • Click this icon to display any current error messages on the Summary page of the printer driver screen. • If the icon is red with black stripes, the Di620PE is powered off. (3) When the printer enters the print-ready state, the icon will turn light green. The power indicator (green) on the panel will be on.

  • Page 25: Panel Indicator

    Meaning Power Indicator ON: Print engine is in the ready state. Blinking: warming up. Slow Blinking: Power save mode. Error Indicator ON: Printing error, fatal error, paper misfeed, something that prevents printing has occured. Blinking: Maintenance call. Di620PE Operator’s Manual...
  • Page 26 2-10 3. Turning ON and OFF Di620PE Operator’s Manual...

  • Page 27: Chapter 3 Printing Procedure

    Chapter 3 Printing Procedure Di620PE Operator’s Manual...

  • Page 28: Printing & Function Settings

    Printing & Function Settings Refer to the following manuals for the procedure about printing and/or function settings. PrintStation Manager Reference Manual PrintStation Manager Configuration Reference Manual Raster Image Processor Reference Manual MicroSpool Reference Manual MicroSpool Configuration Reference Manual Di620PE Operator’s Manual...

  • Page 29: Basic Printing Overview

    • Correct any curl if you are using thick paper. • For making prints on thick paper or OHP transparencies, the following functions cannot be used: Staple, Hole Punch, Folding Options. • The paper will be printed on the side facing Di620PE Operator’s Manual...

  • Page 30: Selecting The Finishing

    It can be combined with Non-Sort, Sort, Group or Staple. 1149O398EA Folding <Only when the Finisher FN-3 is mounted> • This function allows you to fold prints. You have a choice of folding options, either Crease, Half-Fold or Z-fold. 1155O031AA Di620PE Operator’s Manual...

  • Page 31: Selecting The Finishing Function

    The grouped print stacks are stacked in the and grouped stacks are separated by a same direction, but in a sawtooth manner by separator page. shifting the tray to the front or rear for each stack. 1166O035AB Di620PE Operator’s Manual...
  • Page 32 On Screen Print 1155O791EA Knob 1155O723AA Pull out Knob: 2-Hole Push in Knob: 3-Hole * The number of punch holes can be graphically identified on the Display. Di620PE Operator’s Manual...
  • Page 33 * When you touch a stapling key, the finisher is automatically set into the Sort mode. Useful Tip Paper size: A3L to A4, 11″×17L″ to Letter Number of sheets: 2 to 50 Kinds of Paper: Plain paper, Recycled paper Di620PE Operator’s Manual...

  • Page 34: Manual Staple

    Finisher Panel. 1155O036AB NOTES • Make sure of the stapling position and press the paper stack against the end bracket. • Up to 50 sheets of plain paper can be stapled. 1155O037AA Di620PE Operator’s Manual...
  • Page 35 . This staples the paper stack or set. 1155O038AA Useful Tip This feature is useful for stapling document sets after making prints. Open the Manual Staple Tray Cover and remove the stapled paper stack. 1155O760AA Close the Manual Staple Tray Cover. Di620PE Operator’s Manual...
  • Page 36 * The finished print size has a length half that of the paper loaded in the printer. NOTE Even if Staple is previously set to a corner or center position, the setting of Half-Fold automatically cancels this setting and reselects a side stapling position. Di620PE Operator’s Manual...
  • Page 37 • Even if screen settings are made to make 2-sided prints, the prints to be Z-Folded will be 1-sided. • Even if Staple is previously set to center position, the setting of Z-Fold automatically cancels this setting and reselects a side stapling position. Di620PE Operator’s Manual...

  • Page 38: Auto Dual Function

    11 by 17L 50 sheets (no staple) 10 sheets Half- Group Fold Staple 11 by 17L 100 sheets Non-Sort, Sort, 11 by 17L 50 sheets (no staple) 10 sheets Group Fold Staple 11 by 17L 100 sheets 100 sheets Di620PE Operator’s Manual...
  • Page 39 If a stapling sequence is attempted and the number of sheets is greater than the stapling capacity, Stapling is automatically canceled and the Finisher is set into the Sort or Group mode, sorting or grouping prints using the Auto Dual function (but no stapling action takes place). Di620PE Operator’s Manual...

  • Page 40: Note On Stapling

    200 sets 3 to 5 prints 150 sets 6 to 10 prints 100 sets 11 to 20 prints 70 sets 21 to 30 prints 53 sets 31 to 40 prints 45 sets 41 to 50 prints 40 sets Di620PE Operator’s Manual...

  • Page 41: Chapter 4 When A Message Appears

    Chapter 4 When a Message Appears Di620PE Operator’s Manual...

  • Page 42: When The Message "The Current Paper Tray Is Empty." Appears

    Slide the Tray back in. 1075O101DA 1161O095DA Load the paper stack into the Tray so that its front side faces down. 1161O009AA NOTE The paper should be loaded no higher than the M (Max. Level Indicator). 1145O555KA Di620PE Operator’s Manual...
  • Page 43 1161O097DA Load the paper stack into the Tray so that its front side faces down. 1161O099DA NOTE The paper should be loaded no higher than the M (Max. Level Indicator). 1145O555KA Di620PE Operator’s Manual...
  • Page 44 Press the leading Descent Key. edge of the paper stack tightly up against the right side of the Tray. 1075O052BA 1161O106DA NOTE The paper should be loaded no higher than the M (Max. Level Indicator). 1145O555KA Di620PE Operator’s Manual...

  • Page 45: Large Capacity Cassette

    Place the paper stack onto the Paper Plate so automatically. that its front side faces up. NOTE The Paper Plate may not ascend if the Cassette Door is not closed completely. Be sure to close the Door completely. 1134O054AA Di620PE Operator’s Manual...

  • Page 46: When The Message "Replenish Toner." Appears

    Then, turn the Toner Bottle upside down and tap it in the same way again. 4115O045AA Swing open the Toner Bottle Holder and pull 1075O229AA out the used Toner Bottle. 1075O054AA Di620PE Operator’s Manual...
  • Page 47 Pull the seal off the Toner Bottle. Toner Replenisher Use the Toner Replenisher function available from the User Mode if the image is light immediately after the Toner Bottle has been replaced with a new one. 1075O058AA Di620PE Operator’s Manual...

  • Page 48: When The Message "The Staple Cartridge Is Empty." Appears

    Lever, pull the Staple Cartridge out of its port. 4115O014AA 1155O069AA Open the Finisher Front Door. Pull the staple sheet about 3 cm out of the new Staple Cartridge and break off that portion. 1155O067AA Slide out the Staple Unit. 1136O012AA 1155O068AA Di620PE Operator’s Manual...
  • Page 49 Removing the Staple Cartridge before then will result in stapling trouble. • After a new Staple Cartridge has been installed, be sure to run a test-stapling sequence to ensure that staples are properly driven into the paper. Di620PE Operator’s Manual...
  • Page 50 Insert the Staple Cartridge into the Stapler Unit until it clicks into place. While pressing down the green lever, pull out the Staple Cartridge. 1166O130AB Align the arrows and firmly push the Stapler 1166O128AA Unit down into the well. 1166O131AB Di620PE Operator’s Manual...
  • Page 51 Press and turn the Knob to lock the cover. 1155O767AA NOTES • Replace the Staple Cartridge only after you are prompted to do that by the message. Removing the Staple Cartridge before then will result in stapling trouble. Di620PE Operator’s Manual...

  • Page 52: When The Message "A Paper Misfeed Has Been Detected." Appears

    When a misfeed occurs, the error indicator (red) on the printer’s front panel will light. This light will go out whenever the front door is opened. Copier p. 4-14 4115O017AA 4115O018AA 4115O019AA 4115O020AA 4115O021AA Duplex Unit p. 4-16 4115O022AA 4115O023AA 4115O020AA Di620PE Operator’s Manual...
  • Page 53 4. When the Message “A paper misfeed has been detected.” Appears Large Capacity Cassette p. 4-18 Intelligent Manual Feeding Tray p. 4-19 4115O024AA 4115O019AA Finisher FN-3 p. 4-20 4115O025AA 4115O026AA 4115O027AA 4115O028AA 4115O029AA 4115O030AA 4115O031AA 4115O032AA Finisher FN-102 p. 4-28 4115O036AA 4115O033AA 4115O034AA 4115O035AA Di620PE Operator’s Manual...

  • Page 54: Misfeed Clearing Procedures

    4115O047AA Turning Knob , pull out the sheet of paper. Then turn Knob to return any 1155O081AA paper to the Duplex Unit. Lower the Lever and slide out the Unit. 1155O078AA Close the Left Door. 1155O082AA Di620PE Operator’s Manual...
  • Page 55 Useful Tip After the paper misfeed has been cleared, the Slide in the Unit and raise the printer automatically resumes a print cycle Lever back up again. without the Start Command. 1155O086AA Di620PE Operator’s Manual...

  • Page 56: Duplex Unit

    Duplex Unit. 1155O089AA Raising Misfeed Clearing Guide remove the sheet of paper. 1155O078AA Close the Left Door. 1155O090AA Raising Misfeed Clearing Guide Open the Right Door. remove the sheet of paper. 1155O079AA 1155O091AA Di620PE Operator’s Manual...
  • Page 57 1155O092AA Slide Duplex Unit back into the printer. 1155O093AA Close the Front Door. Useful Tip After the paper misfeed has been cleared, the printer automatically resumes a print cycle without the Start Command. Di620PE Operator’s Manual...
  • Page 58 Slide the Cassette back against the printer. the Cassette Door and remove the sheet of paper. 1134O030AA 1134O027AA Close the Cassette Door. 1134O033AA Press the Lock Release Lever and slide the Cassette away from the printer. 1134O028AA Di620PE Operator’s Manual...
  • Page 59 Pull out the sheet of paper from the Paper Take-Up Section. Then, close the Right Door. 1155O087AA Place the paper stack back on the tray. 1075O073AA To reset the paper misfeed indication on the Touch Panel, open and close the Front Door. 4115O048AA Di620PE Operator’s Manual...
  • Page 60 Opening Misfeed Clearing Guide remove the sheet of paper. 1155O407AA Turn Knob to feed the sheet of paper. 1155O406AA Loosen two screws, open the Misfeed Clearing Guide and remove the sheet of 1155O408AA paper. Open Misfeed Clearing Guide 1155O700AA 1155O409AA Di620PE Operator’s Manual...
  • Page 61 1155O645AA Slide the Finisher back against the printer. 1155O410AA Turn Knobs to feed the sheet of paper. 4115O015AA 1155O411AA Pinching the lever of Misfeed Clearing Guide , open 1155O412AA Remove the sheet of paper and close 1155O413AA Di620PE Operator’s Manual...
  • Page 62 4115O014AA Open the Finisher Front Door. 1155O411AA Pinching the lever of Misfeed Clearing Guide , open 1155O067AA Pinching the lever of Misfeed Clearing Guide , open 1155O412AA Remove the sheet of paper and close 1155O414AA 1155O413AA Di620PE Operator’s Manual...
  • Page 63 4115O039AA 1155O645AA Open Exit Tray and remove the sheet of paper. Slide the Finisher back against the printer. 1155O424AA 4115O015AA Close Open Manual Staple Tray Cover FN10 and remove the sheet of paper. FN10 1155O425AA Close FN10 Di620PE Operator’s Manual...
  • Page 64 Open the Finisher Front Door. 1155O409AA Remove the sheet of paper and close Misfeed Clearing Guide 1155O067AA Raising Misfeed Clearing Guide remove the sheet of paper. 1155O410AA Turn Knobs to feed the sheet of paper. 1155O407AA 1155O411AA Di620PE Operator’s Manual...
  • Page 65 Open Misfeed Clearing Guide 1155O413AA Turn Knobs together five turns to feed the sheet of paper. 1155O409AA Remove the sheet of paper and close Misfeed Clearing Guide 1155O408AA 1155O410AA 1155O416AA Di620PE Operator’s Manual...
  • Page 66 , remove the sheet of Remove the sheet of paper and close paper and then lower Misfeed Clearing Guide 1155O413AA 1155O420AB Slide out Paper Folding Unit Opening Misfeed Clearing Guide remove the sheet of paper. 1155O417AA 1155O421AA Di620PE Operator’s Manual...
  • Page 67 4. When the Message “A paper misfeed has been detected.” Appears Opening Misfeed Clearing Guide remove the sheet of paper. 1155O423AA Slide Paper Folding Unit back into the printer. 1155O422AA Close the Finisher Front Door. 1155O645AA Slide the Finisher back against the printer. 4115O015AA Di620PE Operator’s Manual...
  • Page 68 Open Misfeed Clearing Guide 1155O742AA 1166O168AA Close Misfeed Clearing Guide until CAUTION it clicks into position. Metallic parts inside Misfeed Clearing Guide are very hot. Do not touch anything but the paper to prevent you from getting burned. 1155O743AA Di620PE Operator’s Manual...
  • Page 69 Finisher. 1166O173AA 1155O745AB Remove the sheet of paper and close Misfeed Clearing Guide Remove the sheet of paper. 1155O746AC 1166O174AA Close Misfeed Clearing Guide Slide the Finisher back against the printer. 1155O747AA 4115O049AA Di620PE Operator’s Manual...

  • Page 70: When A Staple Misfeed Occurs

    Staple Cartridge. Clearing Guide 1166O128AA 1166O174AA Push up the guide of the Staple Cartridge and Press and turn the knob to open the cover at pull out one staple sheet. the rear of the Finisher. 1166O177AA 1155O766AA Di620PE Operator’s Manual...
  • Page 71 Align the arrows and firmly push the Stapler Unit down into the well. 1166O131AB Press and turn the knob to lock the cover. 1155O767AA NOTE If the finisher does not staple after clearing the staple misfeed, call your Tech. Rep. Di620PE Operator’s Manual...

  • Page 72: What Does Each Message Mean

    This mode cannot be selected You have set two functions that Cancel either one of the two with the conflict with each other. functions. Di620PE Operator’s Manual...

  • Page 73: Troubleshooting

    Chapter 5 Troubleshooting Di620PE Operator’s Manual...

  • Page 74: When This Type Of Print Is Produced

    Change the paper. p. 4-2 The paper is damp. 4115O051AA The image is too dark. Is the print driver set too dark? 4115O052AA Change the paper. p. 4-2 The print image is fuzzy. The paper is damp. 4115O053AA Di620PE Operator’s Manual...

  • Page 75: The Printer Is Not Functioning As Designed

    The room circuit breaker is Close the room circuit breaker. Panel) open. * If these procedures do not correct the problem, turn OFF the Power Switch, unplug the power cord from the power outlet, and contact your Technical Representative. Di620PE Operator’s Manual...
  • Page 76 2. The Printer is not Functioning as Designed Di620PE Operator’s Manual...

  • Page 77: Miscellaneous

    Chapter 6 Miscellaneous Di620PE Operator’s Manual...

  • Page 78: Specifications

    Trailing Edge: 3mm Rear Edge: 3mm Power Requirements AC120V, 220V-240V; 50/60Hz Power Consumption 1.5kW or less Dimensions Width : 777 mm (30-1/2 ) Depth : 735 mm (29 Height : 980 mm (38-1/2 Weight 198kg (441 lbs.) Di620PE Operator’s Manual...
  • Page 79 3,000 sheets (80 g/m ), 3,400 sheets (20 lbs.) Power Source Supplied from printer Power Consumption 40W or less Dimensions Width: 440 mm (17-1/4 Depth: 446 mm (17-1/2 Height: 500 mm (19-3/4 Weight 16.4 kg (36-1/4 lbs.) Di620PE Operator’s Manual...
  • Page 80 30 sheets Z-Folded + Unfolded*: 1000 sheets Z-Folded LetterC (no staple) Unfolded* *Z-Folded: 5 sheets/set Z-Folded: 100 sheets Z-Folded: 100 sheets Unfolded*: Z-Folded + Unfolded*: Z-Folded + Unfolded*: 2 to 30 sheets 2 sheets/set 1000 sheets 2000 sheets Di620PE Operator’s Manual...
  • Page 81 (no staple) *Z-Folded: 5 sheets/set Unfolded* Z-Folded: 100 sheets Z-Folded: 100 sheets Unfolded*: Z-Folded + Unfolded*: Z-Folded + Unfolded*: 2 to 30 sheets 2 sheets/set 1000 sheets 2000 sheets * Only 11 17 size paper can be Z-folded. Di620PE Operator’s Manual...
  • Page 82 Power Consumption 63W or less Dimensions Width: 656 mm (25-3/4 Depth: 620 mm (24-1/2 Height: 984 mm (38-3/4 Weight Finisher: 42.7 kg (94-1/4 lbs.) Transport Unit: 2.8 kg (6-1/4 lbs.) Accessories Staple Cartridge, 5000 staples/cartridge 1 piece Di620PE Operator’s Manual...

  • Page 83: Care Of The Printer Cleaning

    Housing Front Door Wipe the surface of the housing clean with a Swing down the Front Door. soft cloth dampened with alcohol. Wipe the surface of the Front Door clean with a soft, dry cloth. 4115O043AA 1075O090AA Di620PE Operator’s Manual...

  • Page 84: Function Combination Matrix

    ✕ : Either of the functions which is set last takes precedence. J : The function set last takes precedence. (Center Staple is automatically selected.) L : 2-Point Side Staple is automatically selected. - : Does not apply. Di620PE Operator’s Manual...

  • Page 85: Description Of Paper Size Table

    8-2/3” 13” 220mm 330mm FOOLSCAP FOLIO 8-1/4” 13” 210mm 330mm 8-1/4” 11-3/4” 8-1/4” 11-3/4” 210mm 301mm LETTER 8-1/2” 11” 210mm 279mm GOVERNMENT LETTER 8” 10-1/2” 203mm 267mm QUARTO 8” 203mm 254mm STATEMENT INVOICE 5-1/2” 8-1/2” 140mm 216mm Di620PE Operator’s Manual...
  • Page 86 Copyright 1999 MINOLTA CO., LTD. Made in Japan The information contained in this manual is subject to change without notice to incorporate improvements made on the product or products the manual covers. MINOLTA CO., LTD. Image Information Products Marketing Headquarters 1999.

Table of Contents