Minolta Di2510f Advanced Information page 498


Symptom
The printed output is too
dark.
The printed output is blurry. The paper is damp.
14-4
Possible Cause
The "Auto" Density
setting is set too dark.
A Density setting that is
too dark is selected.
The original glass is
dirty.
The document was not
pressed close enough
against the original
glass.
The document was not
pressed close enough
against the original
glass.
Troubleshooting
Remedy
Adjust the "Default
Copy Output Levels"
function on the User's
Choice screen.
Otherwise, cancel the
"Auto" Density setting,
and then select the
desired setting.
Touch [Density], and
then select a lighter
Density setting.
Wipe the glass with a
dry soft cloth.
Position the document
so that it is pressed
closely against the
original glass.
Replace the paper.
Position the document
so that it is pressed
closely against the
original glass.
Di2510f/Di3510f