Specifications For Paper Selection When Rx Printing (Mode 008) - Minolta Di2510f Advanced Information



Specifications for Paper Selection when RX Printing (Mode 008)

Specifies the paper selection when RX printing.
Settings at time of purchase
Bit
Setting
How to Set
The grayed out cells are the settings at the time of purchase.
Bit Details
7 Specifies how
to determine
there is not
paper (available
only during RX
printing)
6, 5, Specifies the
4, 3 paper size for a
received image
(available only
during RX
printing)
2, 1, 0
12-66
Administrator Management Operations
7 6 5 4
0 0 0 0
Setting Explanation
0 Paper preference (determined according
to whether there is paper)
1 Cassette preference (determined
according to the cassette size or the
previous paper information regardless of
whether there is paper)
0000 Standard method 1
0100 Fit to Width Method
1
1000 Same Width
Other * Do not specify
times other than
those above.
000 * Do not change these bits.
3 2 1 0
0 0 0 0 (HEX: 00)
• Standard method
1: When the
width is the
same, preference
to equivalent size
output
• With the
"standard
method", the
paper is
automatically
selected
according to its
length and width
• When "Fit to
Width" is set,
paper that is
wider is not
selected
• When "Same
Width" is set,
paper having the
same width is
selected
Di2510f/Di3510f