Table of Contents
Advertisement
5.16
"Separate Scan" Function
Scanning a Document in Separate Batches
When copying a document with a large number of pages, the document
can be divided and scanned in separate batches, and then it can be
printed as a single document.
Tip
If the memory becomes full while scanning, scanning is stopped. If
this occurs, press the [START] key to print the pages that were
scanned before scanning was stopped.
To make copies using the "Separate Scan" function
Load the document into the duplexing document feeder or position it
on the original glass.
Press the [COPY] key.
Touch [AUXILIARY], and then touch
[SEPARATE SCAN].
Press the [START] key.
The document is scanned.
After the first document batch is
scanned, load the second
document batch into the duplexing
document feeder or position it on the original glass, and then press
the [START] key.
After all document batches have been scanned, touch [FINISH].
Press the [START] key.
The copies are printed.
5-28
Copy Operations
Di2510f/Di3510f
Advertisement
Table of Contents
