Handlebar Switches - Yamaha XMAX 125i 2005 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Handlebar switches

Pass switch "PASSING"
1
3
2
3
4
1. Dimmer switch "j/k"
2. Pass switch "PASS"
3. Turn signal switch "c/d"
4. Horn switch "a"
1 2
1. Start switch "g"
2. Hazard switch " "
EAU12343 Press this switch to flash the head-
light.
EAUS1300
Dimmer switch "
Set this switch to "
beam and to "
k
With the headlight on low beam,
press this switch downwards to flash
the headlight.
Turn signal switch "
To signal a right-hand turn, push this
switch to " ". To signal a left-hand
d
turn, push this switch to "
released, the switch returns to the
center position. To cancel the turn
signal lights, push the switch in after it
has returned to the center position.
Horn switch "
a
Press this switch to sound the horn.
Start switch "g"
EAUS1020
/ "
j k
" for the high
j
" for the low beam.
EAU12460
1. Start switch "g"
/ "
c d
2. Hazard switch "
Push this switch while applying the
". When
c
front or rear brake to crank the engine
with the starter.
CAUTION:
See page 5-1 for starting instruc-
tions prior to starting the engine.
EAU12500
"
Hazard switch "
With the key in the "f" position, set
this switch to "
hazard lighting (simultaneous flashing
of all turn signal lights). To turn off the
hazard lighting, set this switch to "h"
and, then turn the key to "e".
3-8
1 2
"
", "h"
" to turn on the
EAUM1131
ECA10050
EAUM1990