The Front Panel - Barco NH-12 User Manual

OPEN
Image 4-13
Power plug spring system
4.5.2

The front panel

View
The front panel of the projector can be divided in 2 major parts :
1. Signal Input/Output section
2. System input/output section
1
2
2
DESKTOP INPUT DESKTOP INPUT DESKTOP INPUT
Image 4-14
Front panel connections
The signal input/output section
The input/output section has a modular architecture i.e. it is composed of several (5) slots which can be equipped with different input
modules :
The different available inputs that can be installed :
• RGBHV & Video analog input
• DVI & Computer (D15) VGA input
• SDI/HDSDI (option)
• DVI/HDMI (HDCP) (option)
The different available outputs :
• DVI output & RS232 IN
The projector is by default equipped as follows:
• Layer 1: empty (can be fitted with any input board)
• Layer 2: empty (can be fitted with any input board)
• Layer 3: RGB & Video input board (fixed)
• Layer 4: DVI & D15 input board (fixed)
• Layer 5: DVI output and RS232 board (fixed)
R59770121 NH-12 04/05/2011
R / PR R / PR R / PR G / Y G / Y G / Y B / PB B / PB B / PB Hs / Cs Hs / Cs Hs / Cs Vs Vs Vs VIDEO VIDEO VIDEO S-VIDEO S-VIDEO S-VIDEO
DVI DVI DVI COMPUTER COMPUTER COMPUTER
RS 232 C RS 232 C RS 232 C DVI DVI DVI R.C. R.C. R.C.
LOCKED
4. Installation
23