Lamp Runtime Warning - Barco NH-12 User Manual

Values
Warning
Number of strikes
Hardware :
Serial number
Article number
EEPROM version
Table 7-4
Lamp Information
How to display the lamp info ?
1. Press MENU to activate the Tool bar
2. Press → to select the Lamp item
3. Press ↓ to Pull down the Lamp menu
4. Use ↑ or ↓ to select Info...
Image 7-103
5. Press ENTER
A text box is displayed
Image 7-104
7.7.2

Lamp runtime warning

What can be done ?
When the lamp has reached a predetermined runtime , a warning message will be displayed on the screen. The lamp runtime
warning can be set in a range from 30 to 200 hours. The runtime warning is displayed by default at 30 hours before end of lamp
lifetime. This warning message can be removed by hitting Back on the RCU.
R59770121 NH-12 04/05/2011
Description
Time set at which a warning is generated. Using the lamp longer than the maximum run time
may damage the projector
Total times the lamp is started up
Unique serial number of the lamp
Article number of the lamp
version of the EEPROM used in the lamp housing
7. Advanced
107