Barco NH-12 User Manual page 170

8. Maintenance
How to remove the lamp?
Make sure the projector has finished its cooling down cycle and wait for 15 more minutes before starting this procedure.
1. Remove the rear cover (see concerning chapter)
2. Remove the fan outlet (muffler) (see concerning chapter)
3. Release the two no-drop screws of the lamp
Image 8-9
Lamp: fixing screws
4. Pull the lamp to the left side of the projector (= away from the connector) until the lamp feet are free and the lamp can be lifted
Tip: Use the handle at the rear side of the lamp.
Image 8-10
Lamp: removing
5. Lift the lamp to remove it
Tip: Use the handle at the top side of the lamp.
Image 8-11
Lamp: removing
166
Image 8-12
Lamp: removed
R59770121 NH-12 04/05/2011