Connections; Power Connection - Barco NH-12 User Manual

4. Installation
4.5

Connections

Overview
•

Power connection

• The front panel
• Connecting an RGB signal
• Connecting a component video signal
• Connecting a DVI signal
• Connecting a Composite video signal
• Connecting an S-Video signal
• Connecting a Computer
• Connecting a source to the desktop input
• Communications
• Multichannel Installations
4.5.1 Power connection
Electrical ratings
Projector type
NH-12
Galaxy NH-12
iD LH-12
NW-12
Galaxy NW-12
Galaxy NW-7
Power connection
1. Use the supplied power cord to connect the projector to the power outlet.
2. Plug the female power connector into the male connector at the front of the projector, secure the connection with the locking
spring.
Image 4-12
Power connection
22
Voltage (AC)
230V single phase
230V single phase
230V single phase
220–240V single phase
220–240V single phase
220–240V single phase
Current / Power
12 Amps
12 Amps
12 Amps
12 Amps
12 Amps
12 Amps
Frequency
50-60 Hz
50-60 Hz
50-60 Hz
50-60 Hz
50-60 Hz
50-60 Hz
R59770121 NH-12 04/05/2011