Connection Of A Digital Audio Receiver - SMART MX 16 Operating Instructions Manual

Connection of a digital audio receiver

If the 5-channel audio transmission (Dolby Digital Sound/AC3) is to
be used, then the digital audio receiver must be connected to the
optical or co-axial output of the receiver..
Caution!
Please observe the instructions regarding the connection
contained in the digital audio receiver's operating instructions.
An optical cable and co-axial cable are not supplied.
Connecting the co-axial digital output
Remove the protective cap from the receiver's socket marked
"DIGITAL AUDIO (CO-AXIAL)".
Plug the optical cable in the receiver's socket marked "DIGITAL
AUDIO (CO-AXIAL)".
Connect the optical cable to the digital audio receiver.
Connection diagram
6BOverview of the equipment
17