3. Installation and Connection
The following diagram shows you the connections among receiver, TV, VCR,
LNB and other equipment, please read this first if you are not sure about the
connection, and it will guide you to the correct connection.
3.1 Connecting to TV & VCR
1. Connect the TV antenna to AERIALIN.
2. Connect the RF-IN of TV to RF-OUT.
3. Connect the Video and Audio of TV to the Video and Audio. Connect Red
and White connector to Audio R and Audio L, and Yellow into Video port
respectively.
4. Go to section 3.2 Connecting to Dish, then connect your dish.
TV
Figure 5. Connecting to TV & VCR