Child Lock/Pin-Code - SMART MX 16 Operating Instructions Manual

Child lock/PIN-Code

The following settings can be made in the "Setup Child lock"
sub-menu:
• Set the child lock (menu block),
• Change the password
At the works the PIN Code "1234" has been pre-set.
To call up a protected menu, the PIN code must be entered at the
prompt.
Enter the PIN code using the numeric buttons.
Each number entered is shown in a box in the input window as a star.
When the correct PIN code is entered, the selected menu opens
automatically.
Changing the PIN Code
The PIN code set at the works can be changed and any four-digit
number can be set as a personal PIN code.
Make a note of the new PIN code, as after changing the
code only the new number is valid. If the PIN code has been
forgotten, then please contact the manufacturer.
Select the menu item "Change password" using the arrow buttons
" " and " " or " " and " ".
Press the "OK" button.
Enter the new PIN code using the numeric buttons.
The display jumps automatically to the menu item "Repeat
password".
Enter the new PIN code again.
The new password has now been accepted.
8BBasic settings
32