Format Of The Video Signal At The Scart Output; Digital Audio Out; Simultaneous Playback Of Picture And Sound - SMART CX72 User Manual

7.9 Format of the Video Signal at the SCART Output

1. In the window TV system move highlight on Scart Out item and press
OK.
2. Press the keys PR+/PR- to select from the list the format of the video
signal at the SCART output and press OK. Possible values are
RGB
and . Default is


7.10 Digital Audio Out

 Select in the menu System Setup the submenu TV System and press
OK.
 Select Digital Audio Out to set the format of the digital audio signal by
using the keys
PCM
– Pulse Code Modulation (default),
DD
– Dolby Digital (multi-channel audio).


7.11 Simultaneous Playback of Picture and Sound

Asynchrony between the image and the sound signals might for example
occur in your home cinema system due to the use of long cables. Your
smart CX72 offers the possibility to balance this by slightly shifting the
audio against the video signal.
1. Select in the menu System Setup the submenu Other and press OK.
2. Select AV Sync Value to set a value of shift between
+500ms
using the keys
0 ms
ue ).
smart CX72
YUV
.
Due to the internal signal processing it's not anymore
possible to select higher resolutions than 576i even at
the HDMI if RGB is selected
and :
For programs broadcasted in DD format, select DD if
you have a connected DD-compatible multi-channel
amplifier or a DD-compatible home cinema system, or if
your TV set is capable of processing DD signals.
und
Extended Settings and Functions
-500ms
(factory default is AV Sync Val-
YUV
and
53