Table of Contents
Advertisement
RAPS
What is RAPS?
All currently-transmitted TV and radio channels are already stored on
the receiver on delivery. RAPS (Receiver Automatic Programme
Search) updates the list of channels and allows the automatic
addition of new channels or the deletion of discontinued channels.
RAPS saves the effort of seeking and programming these changes.
When the receiver is switched on, RAPS checks if there are new
channels available. New channels are automatically included in the
channel listing and shown on the screen as such. When channels are
finally terminated, the corresponding places in the listing are also
automatically deleted.
Parallel to this a personal list can be drawn up (within the list of
favourites) or switch off RAPS at any time using the "Works Settings".
Automatic installation or update of RAPS
The search for new RAPS listings is only supported in TV
mode, not in the receiver's radio mode. To search manually
for a RAPS listing or make subsequent changes in the
configuration of the RAPS system, switch to TV mode.
When RAPS is utilised, the existing channel listing will be
overwritten.
To activate RAPS on the receiver, return the receiver to the Works
Settings (see page 34).
After doing this a prompt is displayed on the screen.
To use RAPS, select the option "Yes" with the arrow buttons " "
or " ".
Press "OK".
The receiver now searches for an up-to-date RAPS listing and then
displays the following information:
14BRAPS
56
Advertisement
Table of Contents
