Table of Contents
Advertisement
Receiver
Caution!
Check the connections of all equipment and the antenna are in
working order before connecting the receiver to the power source.
Insert the receiver's plug in the power socket.
The receiver starts up in Standby mode. On the display the current
time is shown.
Insert the plugs of the auxiliary equipments in the power socket
and switch them on.
Select the AV channel on the TV set.
The receiver is delivered with pre-programmed TV channels and can
be used immediately. To see if there are any new channels, then
activate the channel search. Details are contained on page 30.
7BFirst steps
22
Advertisement
Table of Contents
