First Steps; Switching On And Off; Remote Control - SMART MX 16 Operating Instructions Manual

First steps

Switching on and off

To change from "standby" mode to "on", press the "Power" button
on the remote control or on the receiver.

Remote control

Two micro batteries of designation LR 03 / AAA / 1,5 V are required
for the remote control
Open the battery compartment
Insert two batteries into the battery compartment, taking care that
the polarity is correct polarity. Close the battery compartment
cover carefully until the cover clicks in.
Replace weak batteries in good time.
Replace both batteries at the same time, and use batteries of the
same type.
When a battery is spent, put on a protective glove and clean the
battery compartment with a dry cloth.
Caution!
Batteries can contain poisonous substances, which can be harmful
to health and damage the environment. Please dispose of used
batteries in accordance with current legal regulations. Never throw
batteries away with normal domestic waste.
The remote control transmits infra-red signals to the receiver. Aim the
remote control at the front panel of the receiver and briefly press the
required button once.
7BFirst steps
19