Setting
LNB operation
Positioner
Choose the desired settings.
Motor control
Caution!
Leave the setting-up of the motor control to properly-trained
personnel. Otherwise the satellite equipment may not function
correctly.
In order to use this function, the satellite equipment must
possess a motor control.
Select the option "STAB USALS" or "DiSEqC 1.2" using the arrow
buttons " " and " ".
Press the "OK" button.
The following settings can be made in the "Motor Control" sub-menu:
Options
H/V (Horizontal/Vertical)
14V (Vertical)
18V (Horizontal)
Off (Aus)
None
STAB USALS
DiSEqC 1.2
8BBasic settings
Description
Leave this setting at "H/V".
The further settings are only
relevant for single cable systems
or special in-house distribution.
Settings for the motor control of
the satellite antenna. These only
apply to an antenna with
corresponding function (see page
27).
27