Connecting Up The Receiver - SMART MX 16 Operating Instructions Manual

Connecting up the receiver

The receiver is connected by means of an LNB cable to the
connection socket of the satellite antenna. Before connecting the
receiver an LNB cable may have to be installed.
An LNB cable is not supplied.
Danger!
The braided sheath and the internal conductor of the LNB cable
are under current during operation. Whilst operating, do not touch
the LNB cable. (Danger of injury through electric shock!)
Caution!
Before connecting up, remove all packaging from the receiver
otherwise the receiver could be damaged.
Caution!
Only connect up the receiver to the power source after all
equipment and the antenna have been correctly connected.
Otherwise the receiver could sustain damage.
6BOverview of the equipment
14