Table of Contents
Advertisement
The transmission starts and the update is carried out. This process
can take several minutes.
To abort the transmission, press the "EXIT" button.
Switch the receiver with the updated software off and wait a few
seconds.
Disconnect the serial cable.
Switch on the receiver with the updated software again.
De-installation
Disconnect the receiver and the auxiliary equipment from the
power source.
Unscrew the LNB cable from the receiver.
Remove the batteries from the remote control, if the receiver is not
to be used for a long period of time.
Pack the receiver, the cables and the remote control in the box.
Store the receiver and all accessories in a dry and dust-free place.
Protect the receiver from frost.
9BOperation
50
Advertisement
Table of Contents
