Changing Antenna Settings - SMART MX 16 Operating Instructions Manual

Digital satellite receiver with integrated cryptoworks interface
Table of Contents

Advertisement

Changing antenna settings

In the "Antenna Settings" sub-menu the following settings can be
changed:
Setting
Satellite
LNB frequency
High L.O
Low L.O
22kHz impulse
DiSEqC
Options
e.g.:
[019.2° E] Astra1
[013.0° E] Hotbird 1–5
Universal
"Wideband"
OSC C-Band
C-Band
Ku-Band
On/Off
DiSEqC-A
DiSEqC-B
DiSEqC-C
DiSEqC-D
Tone-A
Tone-B
Off
8BBasic settings
Description
The most common satellites are
pre-programmed. Additional
satellites can be inputted in
Chapter "Motor control" (see page
27).
These settings are
pre-programmed for the most
common satellites.
These settings are
pre-programmed for the most
common satellites. The settings
can be altered using the numeric
buttons.
Here the individual satellites can
be allocated directly to a DiSEqC
position.
26

Advertisement

Table of Contents
loading

Table of Contents