Mercedes-Benz Vito Operating Instructions Manual page 93

Standard rear bench seat
2 Release lever for front seat legs
3 Floor anchorages
E
Pull the release lever for front seat legs
2 up.
E
Hold the rear bench seat by the lower
edge of the seat cushion.
E
Fold the bench seat forwards slightly
and lift it out of floor anchorages 3.
G
Risk of injury
In order to ensure that the rear seat bench
can securely engage, keep the seat ancho-
rages in the floor free from dirt and foreign
objects.
Seats that are not correctly engaged could
be thrown about the vehicle interior in the
event of heavy braking or a sudden change
of direction and cause severe or fatal inju-
ries to yourself and other people.
E
To fit: hold the bench seat by the lower
edge of the seat cushion.
E
Guide the rear bench seat into front
floor anchorages 3, slide it in from
above and allow it to engage.
E
Fold release lever 2 down towards the
vehicle floor.
Nur fuer internen Gebrauch
Fitting the standard rear bench seat
1 Release lever for rear seat legs
4 Indicator tab for correct floor anchor-
age
E
Fold the rear bench seat back to the
upright position.
The rear bench seat is correctly en-
gaged if:
indicator tabs 4 for correct floor
I
anchorage are fully retracted into
the seat legs
I the seat legs engage audibly
G
Risk of injury
Before you start your journey, make sure
that the rear seat bench is engaged.
Controls
Seats
3
ee
91