Dipped-Beam Headlamps - Mercedes-Benz Vito Operating Instructions Manual

Practical advice
Electrical system
1 2
1 Housing cover with catch
2 Retaining lug
3 Housing cover
5
E Press retaining lugs 2 down.
Housing cover 3 is unlocked.
E
Fold the housing cover to the rear.
E
Remove the housing cover upwards.
326
Dipped-beam headlamps, main-beam
3
2
headlamps, foglamps
Bulb arrangement in the left headlamp (in-
side):
N82.10-2537-31
4 Turn signal lamps
5 Dipped-beam headlamp
6 Foglamp
7 Main-beam headlamp
E
Disconnect the connector from the
bulb holder.
E
Release the retainer spring and remove
the bulb.
E
Insert the new bulb in such a way that
its base fits into the recess of the bulb
holder.
E
Attach the retainer spring. Plug the
connector onto the bulb.
Nur fuer internen Gebrauch
E Insert housing cover 3 into the re-
tainer from above.
E
Press the housing cover until retaining
lug 2 engages audibly.
Turn signal lamps
E Turn the housing cover with catch 1
e
( page ) anti-clockwise and remove it.
E
Press the bulb to the rear.
E
Turn it anti-clockwise and remove it
from the bulb holder.
E
Press the new bulb into the bulb holder
and screw it in clockwise.
E
Insert the bulb holder into the lamp
and turn it clockwise until it engages.
Changing the rear bulbs