Mercedes-Benz Vito Operating Instructions Manual page 92

Controls
Seats
E Let go of release lever 2.
The release lever returns to its original
position.
E
Make sure that the carriage for fore-
and-aft adjustment engages audibly on
both sides.
It should not be possible to move the
3
rear bench seat.
Folding the rear bench seat down/up
You can fold the rear bench seat fully for-
wards.
G
Risk of injury
Nobody should travel sitting behind a rear
seat that has been folded forwards.
While the vehicle is in motion, a rear seat
bench that has been folded forwards could
swing back suddenly, e.g. in the event of
sudden acceleration, sudden changes in di-
rection or a collision, and cause injury to
persons sitting on the seats behind.
90
1 Handle
2 Backrest release catch
3 Release handle of rear seat anchorage
E
To fold down the backrest of the
comfort rear bench seat (table posi-
tion): pull backrest release catch 2
up and hold it.
E
Fold the backrest forwards until it en-
gages.
The backrest engages automatically.
E
To fold the comfort rear bench seat
forwards: fold the rear bench seat
backrests to the table position.
E
Pull the release handle of rear anchor-
age 3 up and tilt the rear bench seat.
E
Hold the rear bench seat by handle 1
and fold it forwards.
Nur fuer internen Gebrauch
Removing/fitting the rear bench seat
Standard rear bench seat
1 Release lever for rear seat legs
E
To remove: fold release lever for rear
seat legs 1 up.
E
Tilt the rear bench seat forward by the
upper edge of the backrest.