Armrests - Mercedes-Benz Vito Operating Instructions Manual

Comfort seat
1 Release button
2 Height adjustment
3 Angle adjustment
E
Pull the head restraint up to the stop.
E Press release button 1 and pull out
the head restraint.
Removing the head restraints (electric
head restraint adjustment)
E
Move the head restraint upwards as far
as it will go.
E
Pull the head restraint up and out by
the two support rods. Some force may
be required to overcome the resist-
ance.
Fitting the head restraints (manual
head restraint adjustment)
i
Always make sure that the head restraint is
installed in such a way that its front faces in
the direction of travel.
E
Insert the head restraints so that the
notches in the support rods face in the
direction of travel.
E
Push the head restraint down until it
engages.
Fitting the head restraints (electric
head restraint adjustment)
i
Always make sure that the head restraint is
installed in such a way that its front faces in
the direction of travel.
E
Make sure that the drive of the electric
head restraint height adjustment is in
the fully raised position.
E
Guide the two head restraint support
rods parallel into the head restraint
guide.
E
Press the head restraint down
smoothly until it engages audibly in the
electric drive.
E
Adjust the head restraint to the desired
height with the adjustment button.
Nur fuer internen Gebrauch

Armrests

1 To fold the armrest up
2 To release the armrest
3 To move the armrest to the desired de-
tent position
E
To set the armrest angle: fold the
armrest upwards to an angle of more
than 45° to release it 2.
E
Fold the armrest forwards to the stop
3. Six different detent positions can
be set by moving the armrest upwards
slightly.
E
To fold the armrest up: fold the arm-
rest upwards to an angle of more than
90° 1.
Controls
Seats
3
95