Garage Door Opener; Socket - Mercedes-Benz Vito Operating Instructions Manual

Socket

The socket is located in the rear in the
trim of the lower right-hand side of the ve-
hicle.
1 Socket
i
You can use the socket for accessories
with a maximum power consumption of
180 watts.
!
If you are using the socket to operate an
accessory, the socket continues to be supplied
with power even when the ignition is switched
off. This could eventually discharge the battery
and you will no longer be able to start the en-
gine.

Garage door opener

You can use the integrated remote control
in the rear-view mirror to open and close
up to three different door and gate sys-
tems.
i
The garage door opener is only available
for certain countries. The legal requirements in
all countries concerned must be observed.
Some garage door opening systems cannot be
operated with the integrated remote control.
You can obtain information at any
Mercedes-Benz Service Centre.
1 Indicator lamp
2 Transmitter button
3 Transmitter button
4 Transmitter button
Nur fuer internen Gebrauch
G
Risk of accident
Only press the transmitter button on the in-
tegrated remote control if there are no per-
sons or objects present within the sweep of
the garage door. Persons could otherwise
be injured as the door moves.
Programming the remote control
E
Turn the key to position 2 in the igni-
tion lock.
E
Press and hold one of transmitter but-
tons 2 to 4.
After a short time, indicator lamp 1
will start flashing.
i
The indicator lamp flashes straight away
the first time the transmitter button is pro-
grammed. If the button is already programmed,
the indicator lamp will only start flashing after
20 seconds.
E
Keep the transmitter button pressed.
E
Point the transmitter of the garage
door remote control at the left-hand
side of the rear-view mirror.
Controls
Features
3
ee
207