Memory Function - Mercedes-Benz Vito Operating Instructions Manual

E Turn adjustment wheel 3 towards the
rear.
The front of the seat cushion tilts up.
Adjusting the seat electrically
The switches for adjusting the seat electri-
cally are located on the door trim.
E
Turn the key to position 2.
or
E
Open a door.
or
E
Press a switch.
You can adjust the seat electrically.
i
If the ignition is not switched on, you can
adjust the seats for 30 seconds after unlocking
the doors.
If you wish to adjust the seat electrically after
the 30 seconds have elapsed:
I Remove the key from the ignition and press
the k button to unlock the doors.
I Adjust the seat using the buttons on the
door trim.
1 Head restraint height adjustment
2 Backrest adjustment
3 Fore-and-aft adjustment
4 Seat cushion angle adjustment
5 Seat height adjustment
E
To adjust the fore-and-aft position:
slide the switch forwards or backwards
in the direction of arrow 3.
E
To adjust the seat height: slide the
switch up or down in the direction of
arrow 5.
E
To adjust the seat angle: tilt the
switch up or down in the direction of
arrow 4 until your thighs are gently
supported by the seat.
E
To adjust the backrest: slide the
switch forwards or backwards in the di-
rection of arrow 2.
Nur fuer internen Gebrauch

Memory function

G
Risk of accident
Only use the memory function on the driv-
er's side while the vehicle is stationary. Oth-
erwise you might be distracted when the
seat starts to move on its own.
You can adjust and store your individual
seat settings. Memory button 1 and knob
2 for adjusting seat settings are located
on the door trim.
1 Memory button M
2 Rotary switch for memory positions 1,
2 and 3
You can store three different seat settings
for the driver's and co-driver's seats on
each key.
Controls
Seats
3
ee
83