Lumbar Support - Mercedes-Benz Vito Operating Instructions Manual

Controls
Seats
E
Turn the key to position 2.
or
E
Open the appropriate door.
i
You can adjust the seat for 30 seconds
after unlocking the doors. (
E
To store seat settings: adjust seat.
E
Press memory button M 1.
3
E
Select storage position 1, 2 or 3 with
knob 2 within 3 seconds.
E Press knob 2.
The seat position is stored.
i
You can use the on-board computer to dis-
engage the key-dependent storage function
( e page 115) or ( e page 134).
E
To recall seat settings: turn knob 2
to desired storage position 1, 2 or 3.
E Press knob 2.
The seat moves to the stored position
as long as you keep knob 2 pressed.

Lumbar support

i
The lumbar support provides support for
your spinal column in the lumbar region.
When the lumbar support is correctly adjusted,
it reduces strain on your back while driving.
84
Keep your back in contact with the backrest
while you are adjusting the lumbar support.
Only then can you find the most suitable set-
ting.
e
page 83)
Adjusting lumbar support electrically
1 To increase lumbar support
2 To reduce lumbar support
E
To adjust the lumbar support elec-
trically: press switch 1 forwards.
This increases the support provided to
the lumbar region.
E Press switch 2 backwards.
This decreases the support provided to
the lumbar region.
Nur fuer internen Gebrauch
Adjusting lumbar support manually
3 Lumbar support adjustment
E
To adjust the lumbar support man-
ually: turn adjustment wheel 3 to-
wards the front.
This increases the support provided to
the lumbar region.
E Turn adjustment wheel 3 towards the
rear.
This decreases the support provided to
the lumbar region.