Level - Mercedes-Benz Vito Operating Instructions Manual

Hide thumbs Also See for Vito:
Table of Contents

Advertisement

3 Retainer
4 Support strut
5 Recess
E
Pull retainer 4 out of support strut 3
and guide it upwards in the direction of
the arrow.
E
Lower the bonnet in such a way that re-
tainer 4 glides into recess 5 and
fixes the bonnet.
To close
G
Risk of injury
Make sure that nobody can become trapped
as you close the bonnet.
E
Hold retainer 4 and lift the bonnet
slightly.
E
Guide retainer 4 towards support
strut 3 and apply slight pressure to
make it engage.
E
Lower the bonnet until it is horizontal
and then allow it to drop.
The bonnet engages audibly. If the bon-
net can be raised slightly, it is not prop-
erly engaged.
E
If the bonnet is not properly engaged,
open it once more and allow it to drop
shut from a slightly greater height.
!
Do not use your hands to push the bonnet
down. You could damage it otherwise.
Nur fuer internen Gebrauch
Maintenance
Maintenance points under the bon-
net
1 Brake fluid reservoir (
e
page 252)
2 Coolant tank cap (
e
page 251)
3 Windscreen washer reservoir
e
(
page 253)
4 Cap on engine oil filler neck
(
e
page 254)
Coolant level
Only top up the coolant with the vehicle
standing on a level surface and with the
engine switched off. The coolant tempera-
ture must have dropped below 50 °C.
Operation
4
ee
251

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents