Speedtronic - Mercedes-Benz Vito Operating Instructions Manual

1 To store the current or a higher speed
2 To call up the last stored speed or in-
crease the speed in 1 km/h incre-
ments
3 LIM indicator lamp
4 To store the current speed or a lower
speed
5 To deactivate variable Speedtronic
6 To switch between cruise control and
variable Speedtronic
Selecting variable Speedtronic
E Check whether LIM indicator lamp 3
is on.
If it is, variable Speedtronic is already
selected.
If not, push the cruise control lever in
the direction of arrow 6 .
LIM indicator lamp 3 in the cruise
control lever and the speed limiter indi-
cator lamp m in the instrument clus-
ter are lit and the limit speed appears
on the display.
Variable Speedtronic is selected.
Nur fuer internen Gebrauch
Driving systems
Storing the current speed
E
Briefly move the cruise control lever up
1 or down 4.
Variable Speedtronic is activated. The
current speed is stored and shown in
the display as the limit speed.
i
The limit speed may be exceeded on down-
hill gradients even if variable Speedtronic is ac-
tivated.
If the vehicle exceeds the set limit speed:
the stored speed flashes on the display
I
I an additional warning tone sounds
Apply the brakes yourself if necessary.
G
Risk of accident
If there is a change of drivers, advise the
new driver of the limit speed that is stored.
Only use variable Speedtronic if you will not
have to accelerate suddenly to a speed
above that set as the limit speed. You could
otherwise cause an accident.
You can only exceed the stored limit speed
if variable Speedtronic is deactivated:
I with the cruise control lever
I by depressing the accelerator pedal be-
yond the pressure point (kickdown with
automatic transmission)
Controls
3
ee
189