Mercedes-Benz Vito Operating Instructions Manual page 89

be thrown about the vehicle interior and
cause severe or fatal injuries to you and
others.
E
To fit the easy-entry section: place
front anchorage 1 of the easy-entry
section in the mounting on the rear
bench seat or the front seat leg of the
easy-entry section on the floor anchor-
age.
E
Tilt the easy-entry section forwards
slightly.
Both anchorages engage audibly.
E
Fold the easy-entry section back.
The rear seat leg is correctly engaged if
I the indicator tab for correct floor
anchorage in the rear seat leg is re-
tracted
I the seat leg engages audibly
Comfort rear bench seat with Easy-Entry
1 Easy-entry release lever
2 Release lever for front seat legs
3 Handle
It is easier to get in and out of the third
row of seats if you:
I fold the easy-entry section of the rear
bench seat to the table position
e
( page 90)
I then fold the easy-entry section of the
rear bench seat forwards
Nur fuer internen Gebrauch
E
To fold the easy-entry section for-
wards: pull easy-entry release lever 1
up.
E
Fold the easy-entry section forward as
far as it will go using release lever 1.
G
Risk of injury
When you fold the easy-entry section back,
make sure that your own feet or those of
other passengers are not in the area of the
seat anchorages. When folding back the
easy-entry section of the rear bench seat,
the feet of anyone standing in the area of
danger could become trapped and injured.
E
To fold the easy-entry section back:
fold the easy-entry section back until it
engages in the floor anchorages.
E
To remove the easy-entry section:
pull the release lever for adjusting the
backrest up and fold the backrest to
the table position. ( e page 90)
E Pull easy-entry release lever 1 up.
E
Fold the easy-entry section forwards.
E
Pull the release lever for front seat legs
2 up.
E
Fold the easy-entry section slightly fur-
ther forwards.
Controls
Seats
3
ee
87