Setup - Strong SRT 56 User Manual

Digital terrestrial receiver
Table of Contents

Advertisement

PART 1 • English
5.2.3 Antenna setting
1. Press mEnu to enter main menu.
2. Use the pq buttons to select Installation, press oK to enter the menu.
3. With the pq buttons select Antenna setting and press oK to enter.
4. Press the tu buttons to change setting. If On is selected, the receiver
will provide 5 V antenna power (for active antennas).
5. Press EXIT button to exit.
5.2.4 logical channel numbering
If LCN (Logical Channel Number) is activated and LCN signal is provided by operator,
then channels will be stored at operator defined order. You can activate/deactivate the
LCN function by setting the Local Channel Numbering to On or Off.

5.3 setup

This menu allows you to set OSD Language, TV System, Region and Time, Timer Setting,
OSD Setting, Parental Lock, and Auto Standby function.
1. Press pq buttons to highlight desired menu and press oK button to
enter the setting menus. Then press pq buttons to select desired item.
Settings can be changed by pressing tu buttons. You can get better
overview if press oK first. Now you can select desired setting by pq
buttons and confirm it with oK.
2. Press EXIT button to exit.
5.3.1 osD language
This menu allows you to set OSD Language.
5.3.2 Tv system
This menu allows to setup different settings concerning your TV set.
Display Mode:
Aspect Ratio:
Video Output:
5.3.3 Region and Time
Here you can set your region and time zone.
Region:
GMT Usage:
GMT Offset:
Date/Time:
PAL/NTSC/AUTO
Use this menu to configure the screen aspect between: 4:3 PS
(Pan&Scan), 4:3 LB (Letter Box) and 16:9 (Wide Screen) and AUTO
Switch the video output mode either to RGB or to CVBS
This menu is used for changing the region setting.
This menu is used for usage of GMT.
The options are: Off / User Define / By Region
This menu is valid only when User Define is selected at GMT Usage.
The GMT offset range is "-11:30 ~ +12:00", with half hour steps.
"Date" and "Time" menus are valid only when Off is selected at
GMT Usage. Press oK then numeric button to change the date
and time.
9

Advertisement

Table of Contents
loading

Table of Contents