Specifications - Strong SRT 56 User Manual

PART 1 • English
Problem
The external USB HDD
does not start
A.2 sPECIfICATIons
Demodulator
Demodulator: 16-QAM/64-QAM, QPSK
Transmission mode: 2 K, 8 K
video Decoder
Profile level: MPEG-2 MP@ML
Video resolution: 720 x 576 pixels (PAL),
720 x 480 (NTSC)
Decoding & Video Out: PAL & NTSC
Aspect ratio: 4:3 Letterbox, 4:3 Pan & Scan, 16:9
Audio Decoder
MPEG MusiCam Layer II
Sampling rate: 32, 44.1, 48 KHz
Audio mode: Stereo, Joint Stereo,
Dual Mono, Mono
Tuner
Front End: DVB-T, UHF & VHF Tuner
Input frequency range: 174 ~ 230 MHz (VHF) and 470 ~ 862 MHz (UHF)
Loop through frequency range: 47 ~ 862 MHz
Input signal level: -78 ~ -20 dBm
multimedia
Video recording and playback – MPEG-1 and MPEG-2 encoded (mpg)*
Audio playback – MP3 and WMA formats
Picture view – JPEG format
* STRONG cannot guarantee the playback of external video files, which have not been recorded by this device
memory and system
Flash memory: 1 MByte
SDRAM: 16 MBytes
Connectors
ANT IN: IEC 169-2 Female
TO TV: IEC 169-2 Male
TV SCART (RGB, CVBS)
USB port Type Mini A
IR sensor port
DC IN 5V / 2A DC
Possible cause
Power consumption is too high.
What to do
Connect an extra power supply
adapter to your USB HDD
device.
17