First Time Installation; Main Menu; Channel - Strong SRT 56 User Manual

13. EPg
14. ●
15. TImEshIfT
16. tt / uu
17. TTX
18. Tv/RADIo
19. AuDIo
20. goTo
21. ColouRED buTTons For Multimedia and Teletext functions
The remote control transmits a directional infrared beam. Be sure to aim the remote
control directly at the infrared sensor of the unit during operation. If the sensor has been
covered or there is a large object between the remote control and the sensor, the sensor
will not receive the signal. The sensor may not able to receive the remote signal when it is
exposed to direct sunlight or a strong artificial light (fluorescent or strobe light). In this case,
change the direction of the light or reposition the unit to avoid direct lighting.

4.0 fIRsT TImE InsTAllATIon

If you use the receiver for the first time, the "Easy Install" menu appears. Use the tu
buttons to change settings for setup of Region, OSD Language and Antenna Power
and the pq to select. Then use the pq buttons to move focus to Search and press
oK to proceed with the automatic channel scan.

5.0 mAIn mEnu

In viewing mode you can press mEnu any time to enter the Main Menu. It consists of
following submenus: Channel, Installation, Setup, Tools and Media+

5.1 Channel

1. Use the pq buttons to select Channel and press oK to enter.
2. Use the pq buttons to highlight the desired item and press oK to select.
3. Press EXIT to exit.
note: You can also press oK in TV mode to enter the channel list.
5.1.1 Tv Channel list
1. In Channel submenu select TV Channel List with the pq buttons and
press oK to enter.
2. Use the tu buttons to change channel group (assumed you have
already set up Favourite groups).
3. With the pq buttons select the channel you want to watch. With oK you
can watch the selected channel in full screen mode.
6
Shows the EPG (Electronic Program Guide) in TV mode
Records the TV program to the USB-storage device
Activates the timeshift function
Fast rewind / Fast forward
Shows Teletext on OSD (On Screen Display)
Toggles between TV and RADIO mode
Shows list of the current audio channel /language
Only used to go to desired position in Record/Playback mode
PART 1 • English
Fig. 7