Dsc Test Call - Standard Horizon ECLIPSE DSC+ GX1200E Owner's Manual

9.10 DSC TEST CALL

Use the following procedure to ensure the DSC feature are functioning with
another DSC radio.
1. Press the
appear in the display.
2. Press the
TEST ".
3. Press the
keys select a name to send the DSC test
call to. This directory uses the individual/
position call directory information.
4. If " MANUAL " is selected in the previous step,
enter the MMSI number (nine digits) which you
want to send the test signal to. To do this,
press the
numbers 0 to 9, then press the
key to move the entry location to the right. If a
mistake was made entering in the MMSI
number, repeat pressing the
until the wrong number is selected, then press
the /
finished entering the MMSI number, press and
hold the
5. Press the
signal.
6. After the DSC test call is transmitted, the
GX1200E waits for a reply from the radio
which was called, the display will show " WAIT
FOR ACK ".
7. When and acknowledgement call is received, the GX1200E will produce
a ringing sound and the display will show " ACKNOWLEDGED ". (DSC
BEEP needs to be enabled to hear alarm.)
8. Press the
mode display.
Page 68
key. The " D S C M E N U " will
keys to select the " DSC
/
soft key, then using the
/ keys to scroll through
keys to correct the entry. When
soft key.
soft key to transmit the test
soft key to return the display to the radio operation
-DSC MENU-
INDIVIDUAL
GROUP
ALL SHIPS
-DSC MENU-
/
POS REPORT
DSC LOG
DSC TEST
-TEST CALL-
MANUAL
YAESU
STANDARD
soft
-TEST CALL-
YAESU
TRANSMIT?
soft key
-TEST CALL-
YAESU
WAIT FOR ACK
SINCE
RESEND
RX TEST ACK
YAESU
ACKNOWLEDGED
SINCE
0:01
0:01
GX1200E