Dsc Test - Standard Horizon QUANTUM AIS GX6000E Owner's Manual

4. Press the CLEAR key to return to radio operation.
5. Auto POS Polling starts and "[A]" icon will light up on
the screen.

10.10 DSC TEST

This function is used to contact another DSC equipped vessel to ensure the
DSC functions of the radio are operating.
To use this feature, the radio that will receive the test call also needs
to have the DSC Test feature.
To perform the DSC test you will need to enter the MMSI of another vessel into
the individual directory or manually enter in the MMSI using the procedure below.
10.10.1 Programming MMSI into Individual Directory
Refer to section "10.4.1 Setting up the Individual / Position Call Directory".
10.10.2 Transmitting a DSC Test to Another Vessel
DSC Test call by using Individual/Position Directory
[ ]  "DSC CALL"  "DSC TEST CALL"
1.
2. Rotate the DIAL/ENT knob to select "HISTORY" or
"MEMORY", then press the [SELECT] soft key.
3. Rotate the DIAL/ENT knob to select the ship name,
then press the [SELECT] soft key.
4. Press the [YES] soft key to transmit the DSC test call
to the other vessel.
5. Press the [QUIT] soft key to return to radio operation.
Page 82
NOTE
GX6000E