Programmable Mixing 1 And 2 - Spektrum DX6I User Manual

6-channel 10-model memory full range dsm2 2.4ghz radio system for airplanes and helicopter
Hide thumbs Also See for DX6I:
Table of Contents

Advertisement

Press the roller to access the Swashplate Mix function.
Reduce photo to 13.5%
SWASH MIX
AILE
ELEV
PITCH
Rotate the roller to highlight the desired channel that you wish to adjust.
AILE-
Aileron
ELEV-
Elevator
PITC-
Pitch
Press the roller to access the selected channel's value.
Rotate the roller to select adjust the selected value.
After the desired value is programmed press the roller to deselect the value.
TO RETURN TO ThE MAIN SCREEN
Press and hold the roller for more than 3 seconds then release the roller and the system will return
to the main screen.
TO RETURN TO ThE ADjUST lIST SCREEN
Rotate the roller to highlight LIST then press the roller.
124
List
+60
+60
+60
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE

PROGRAMMAblE MIXING 1 AND 2

The DX6i offers two programmable mixes that allow stick or switch inputs to control the output of two or more
servos. This function allows mixing any one channel to any other channel, or the ability to mix a channel to itself.
The mix can remain ON at all times, or it can be switched OFF in flight, using a number of different switches. Mix
values are adjustable from -125% to 125%. Each channel is identified by a four-character name (i.e., Aileron -
AILE, Elevator - ELEV, etc.). The channel appearing first is the master channel. The second channel is the slave
channel. For example, AILE - RUDD would indicate aileron-to-rudder mixing. Each time the aileron stick is moved,
the aileron will deflect, and the rudder will automatically move in the direction and to the position based on the
value input in the programmable mix screen. Mixing is proportional, so small inputs of the master channel will
produce small outputs of the slave channel. Both mixes offer a trim feature that, when activated, affect the master
channel's trim and also the slave channel.
ACCESSING PROGRAMMAblE MIX 1 OR MIX 2
With the transmitter already powered on and the main screen displayed, press and release the ROLLER to
enter the ADJUST LIST.
ADJUST LIST
MODEL SELECT
Rotate the ROLLER to the right until MIX 1 is highlighted on screen.
ADJUST LIST
SWASH MIX
MIX 1
MIX 2
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
Reduce photo to 13.5%
Main
Reduce photo to 13.5%
Main
9
125

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DX6I and is the answer not in the manual?

Table of Contents

Save PDF