Monitor; Reverse - Spektrum DX6I User Manual

TO PROGRAM A MODEl NAME
Rotate the roller to highlight the block below the MODEL # shown on the screen then press the roller.
Reduce photo to 13.5%
MODEL NAME
Rotate the roller to select the desired position that you wish to assign a letter or number to then press the roller to
access the numbers or letter characters.
Rotate the roller to scroll through the letters/ numbers and when the desired number is selected pressing the roller
will assign it to the selected position.
Repeat this process to complete the model name then highlight OK! when finished.
TO RETURN TO ThE MAIN SCREEN
Press and hold the roller for more than 3 seconds then release the roller and the system will return
to the main screen.
TO RETURN TO ThE SETUP lIST
Rotate the roller to highlight LIST in the upper right corner then pressing the roller will return the system to
the SETUP LIST screen.
84
List
MODEL 1
BLADE 400
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE

MONITOR

The servo monitor screen serves as a useful tool when programming your radio. It displays servo movement and
direction when different programming functions, sticks and/or switches are moved.
TO ACCESS ThE MONITOR
Press the ROLLER and hold while turning on the transmitter to enter the SETUP LIST. When SETUP LIST appears
on screen release the roller.
Alternatively the setup list can be accessed from the main screen by pressing the roller to access the ADJUST LIST,
then scrolling through the ADJUST LIST by rolling the roller to highlight SETUP LIST, then pressing the roller.
SETUP LIST
MODEL TYPE
Rotate the ROLLER to the right until SERVO is highlighted on screen.
SETUP LIST
MODEL NAME
MONITOR

REVERSE

SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
Reduce photo to 13.5%
Main
Reduce photo to 13.5%
Main
3
85