Throttle Trim Setting; Pitch Curve - Spektrum DX6I User Manual

Rotate the roller to adjust the throttle value at the select stick position.
After the desired value is programmed press the roller to deselect the value.
Note: In Throttle Hold the throttle curve is a flat line representing a hold condition. The Hold
position can be adjusted using the values as above.
Repeat this step for all stick positions and for all flight modes.
TO RETURN TO ThE MAIN SCREEN
Press and hold the roller for more than 3 seconds then release the roller and the system will return
to the main screen.
TO RETURN TO ThE ADjUST lIST SCREEN
Rotate the roller to highlight LIST then press the roller.

ThROTTlE TRIM SETTING

The throttle trim lever is only active when the flight mode switch is in the normal position. The throttle trim is used
to increase or decrease the engine rpm to achieve a reliable idle when in the Normal Mode. The throttle trim lever
has no effect in flight modes 1 (Stunt), or in throttle hold.
120 SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE

PITCh CURvE

Adjustment of the pitch curve is very similar to the throttle curve adjustment described in the preceding section. A
thorough understanding of the throttle curve section will make pitch curve adjustment easier to understand.
The DX6i offers three (3) independent pitch curves: Normal, Stunt 1, Hold. Each pitch curve contains five (5)
adjustable points — L, 1, 2, 3 and H.
TO ACCESS ThE PITCh CURvE fUNCTION
With the transmitter already powered on and the main screen displayed, press and release the ROLLER to
enter the ADJUST LIST.
ADJUST LIST
MODEL SELECT
Rotate the ROLLER to the right until PITC CUR is highlighted on screen.
ADJUST LIST
THRO CUR
PITC CUR
SWASH MIX
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
Reduce photo to 13.5%
Main
Reduce photo to 13.5%
Main
7
121